AikanAI
Back to feed
News feedGlobalai

Your Robot’s Safety Functions Already Work. What If the Input Lies?

SourceIEEE Spectrum(spectrum.ieee.org)7 hours ago · 10/28/2026
Your Robot’s Safety Functions Already Work. What If the Input Lies?

This article is brought to you by VicOne .

A mobile robot slows for someone in a hallway. A collaborative arm eases its movement as a worker approaches. A humanoid pauses to let a person pass. Each response depends on information about the robot or its surroundings: a distance reading, a position estimate, or a stop signal.

But what happens when one of those inputs is wrong, and the robot still responds exactly as designed? The mobile robot reads the hallway as clear while someone is still there. The arm estimates that the worker is farther away. The humanoid does not receive a stop signal as a person crosses its path.

In each case, a fault could cause that mismatch. So could deliberate manipulation .

At VicOne LAB R7 , we examine how manipulated inputs can change robot behavior — and what that means for the systems meant to keep people safe.

How an untrusted input can change a robot’s behavior

A robot does more than measure its surroundings. It may interpret what it sees and hears to decide what to do next. Information placed in its environment can therefore influence its actions.

Published research shows how this can happen. In a study of vision-language-action (VLA) models , a patch in a camera’s view reduced task success in simulated robot tests. FreezeVLA found that an adversarial image could cause tested models to ignore later instructions. Although the studies used different methods, both demonstrate how visual input can interfere with a robot’s intended task.

In a robot-dog test using Gemma 4 E4B, text on a poster was treated as an instruction and changed the robot’s movement.

VicOne LAB R7 also tested how untrusted inputs could change robot behavior. In a robot-dog test using Gemma 4 E4B, text on a poster was treated as an instruction and changed the robot’s movement. In a separate hospital-service-robot simulation using Nemotron on NVIDIA Jetson AGX Orin, crafted audio that is inaudible to people changed the robot’s simulated behavior. The assigned tasks did not change; the inputs did.

In a VicOne LAB R7 test, text on a poster changed a robot dog’s movement, illustrating how a crafted input can turn an unlikely outcome into a repeatable attack. VicOne

Safety-related decisions have inputs too

An independent protective system may still stop a dangerous action. But that system also depends on information: readings, estimates, and messages that tell it when to intervene. What happens if one of those inputs is manipulated?

At a robotics bug bounty event, VicOne LAB R7 researchers injected a ROS 2/DDS message into a robot that organizers expected to remain still under a safe-control setting. The robot moved.

A humanoid’s balance controller offers another example. If it relies on a vulnerable gyroscope, sound at the sensor’s resonant frequency could distort its reported rotation. The controller might correct for a tilt that never occurred. Researchers demonstrated the underlying acoustic attack against drones with vulnerable gyroscopes. The research did not demonstrate the same attack chain causing a humanoid to fall.

Other protections could interrupt either chain. The question for safety and security teams is whether those protections detect the danger independently or depend on the same manipulated information.

Figure 1. VicOne maps how accidental faults and deliberate cyber manipulation can lead to similar robot safety outcomes, from loss of control to physical harm. VicOne

Deliberate attacks challenge safety assumptions

A safety assessment may treat a combination of accidental faults as unlikely. Deliberate manipulation changes that assumption. An attacker can choose when to introduce a false input and repeat the same trigger. That does not make harm inevitable, but it may change how cyber risks should be assessed.

Redundant sensors also need an adversarial test. If one action can affect both inputs, their agreement may offer less reassurance than expected. In autonomous driving research , a crafted physical object misled a system combining camera and LiDAR perception. The study does not establish a weakness in a particular robot, but it shows why teams should test whether one manipulation can affect several checks at once.

Cyber threats add intent to the safety equation, so risk assessments based on accidental faults must be revisited to account for attacks that can be timed and repeated.

Security testing strengthens robot safety evidence

Safety teams set limits for speed, protective distances, and permitted operating areas. The evidence behind those limits should also show what happens when the information used to enforce them is deliberately manipulated.

That evidence can also support assessments against applicable requirements. China’s GB/T 45502-2025 addresses information security for service robots. IEC TS 63074 examines security threats that could affect safety-related control systems. The EU Machinery Regulation , which applies from January 20, 2027, includes requirements to protect safety-relevant systems and data against corruption. Each has its own scope, and teams still need evidence for their robot’s design and operating conditions.

Figure 2. Cybersecurity strengthens robot safety evidence throughout the lifecycle. VicOne helps teams test safety limits against manipulation before deployment and monitor the conditions behind safe behavior in operation. VicOne

Before deployment, safety and security engineers can compare normal and adversarial scenarios against the same safety limits. During operation, they can monitor for changes to software, models, sensor signals, or behavior that may call earlier results into question. Any response to suspicious behaviors should follow policies approved by the safety team.

VicOne supports that work across the robot lifecycle. Through the Robotic Hacking Community , VicOne LAB R7 works with researchers to investigate how cyber threats can change robot behavior. VicOne’s Radeis helps teams validate potential…

News is gathered automatically from public robotics & AI feeds on a schedule.

Related

Globalai

"No human at the helm": Delaware plan would let AI agents run entire businesses

Owners of AI-run firms would evade liability for "reckless" AI, US Rep. Comer says.

SourceArs Technica2 hours ago
Globalai

Bank of America kindly asks that you don’t share your banking password with your AI assistant

The banking giant reminds customers that "you're responsible for activity" resulting from your AI agents' access.

SourceTechCrunch2 hours ago
Globalai

Who’s really in charge at Anthropic after the IPO?

Here's a clear explanation of Anthropic's incredibly complex governance structure.

SourceTechCrunch2 hours ago
Globalai

Anthropic IPO warns its AI could blackmail people, become sentient, end humanity

Seven potential AI nightmares pulled from Anthropic's 93-page "Risk Factor" tome.

SourceArs Technica2 hours ago
Globalai

Researchers are getting tired of OpenAI gatekeeping its breakthroughs

On Monday, OpenAI announced impressive breakthroughs in mathematics, computer science, and physics, along with what the company says is an evolving approach to communicating its findings. But despite its apparent course correction, researchers who spoke to The Verge are growing increasingly tired of

SourceThe Verge3 hours ago
Globalai

Anthropic Says It Will Revolutionize Biology—Some Day

In breathless press releases and posts, the company has touted its models’ ability to deliver scientific breakthroughs. But its IPO filing taps the brakes on just how fast its AI will lead to big discoveries.

SourceWIRED4 hours ago